Focus Companies
Oerre
• 19.11.2012
This article is over 3 years old
TEMPERO, punctual controlled mechanical ventilation with efficient energy recovery of up 70%
In order to achieve a better classification of Energy, either for building’s renovation or construction, the tendency is to use materials and systems that make the environments where we live more sealed due to thermic insulation.
As a result, presence of foul air which causes the typical sensation of closed; for this reason the easiest and functional way to make healthier the environment consists in the correct air changing avoiding the expensive dispersion by opening the windows.
By using an energy recovery fan like TEMPERO, with efficiency of up 70%, the incoming fresh air is heated (in winter season) or cooled (in summer season) by the polluted outgoing air allowing not only a healthy ventilation but saving the energy for maintaining the desired indoor temperature.
In the context of “punctual” controlled mechanical ventilation TEMPERO could be a solution with a cost-benefit of very high level; particularly suitable for domestic applications, single room.
The cross-flow heat exchanger is equipped with two washable filters.
Tempero is also provided of a condensation drainage hole to eliminate the excess of condensation.
By extracting and in taking air Tempero grants a natural and healthy air changing expelling foul air due to normal activities mainly from living room, bedroom.. or from premises typically subject to moisture (basements, basements, laundry rooms, bathrooms "blind") or, particularly
isolated (mobile homes, shelters, prefabricated houses and bungalows).
Three versions available: basic, timer and pre-heated for cold climates.
Tempero is suitable for wall mounting on new or existing ducts diameter 100/120 mm.
It is supplied with a PVC ducting pipe (diameter 63 mm and length 400 mm) to be fitted internally to the existing duct; if the depth of the wall exceeds 400 mm a replacement pipe is required.
Pipes of considerable length cause a decrease in performance.
As a result, presence of foul air which causes the typical sensation of closed; for this reason the easiest and functional way to make healthier the environment consists in the correct air changing avoiding the expensive dispersion by opening the windows.
By using an energy recovery fan like TEMPERO, with efficiency of up 70%, the incoming fresh air is heated (in winter season) or cooled (in summer season) by the polluted outgoing air allowing not only a healthy ventilation but saving the energy for maintaining the desired indoor temperature.
In the context of “punctual” controlled mechanical ventilation TEMPERO could be a solution with a cost-benefit of very high level; particularly suitable for domestic applications, single room.
TEMPERO is equipped with two centrifugal fans: one takes the air from the room and extracts it directly outside, the other one takes the external air and pushes it into the room.
During this process the incoming and outgoing air flows (completely separate) cross the heat exchanger made of PVC welded plates: the flow of extracted air transfers thermal energy to the fresh incoming air by reducing energy requirements for heating (air conditioning) the room.The cross-flow heat exchanger is equipped with two washable filters.
Tempero is also provided of a condensation drainage hole to eliminate the excess of condensation.
By extracting and in taking air Tempero grants a natural and healthy air changing expelling foul air due to normal activities mainly from living room, bedroom.. or from premises typically subject to moisture (basements, basements, laundry rooms, bathrooms "blind") or, particularly
isolated (mobile homes, shelters, prefabricated houses and bungalows).
Three versions available: basic, timer and pre-heated for cold climates.
Tempero is suitable for wall mounting on new or existing ducts diameter 100/120 mm.
It is supplied with a PVC ducting pipe (diameter 63 mm and length 400 mm) to be fitted internally to the existing duct; if the depth of the wall exceeds 400 mm a replacement pipe is required.
Pipes of considerable length cause a decrease in performance.
