FEKA VS - VX, Submersible centrifugal pump

• Handle with insulating rubber cover;
• AISI 316 stainless steel drive shaft;
• Double mechanical seal with intermediate oil chamber (atoxic oil), in carbon/alumina on the motor side and silicon carbide/silicon carbide on the pump side.

VS version
Stainless steel pump casing, seal cover, motor casing

VX version

• Technopolymer pump casing with threaded metal insert inserted into the delivery port, stainless steel seal cover, motor casing;
• Dry, asynchronous, sealed and cooled by the pumped liquid;
• Rotor mounted on greased for-life ball bearings, oversized and selected to guarantee greater noise reduction and duration;
• Thermo-amperometersc protection as standard for single-phase version, and the user’s responsibility for the three-phase version;
• Constantly active capacitor on the single-phase version.

Construction in accordance with the IEC 2-3 IEC 61-69 (EN 60335-2-41) standards.

Motor protection class: IP 68
Insulation class: F
Standard voltage:    
220-240V 50Hz Single-phase
400V 50Hz Three-phase

Continual running with liquid at 35 °C and pump completely submersible. The single-phase version can be supplied with float for automatic function.

Power supply cable: 10 mt of H07RN-F cable with Shuko plug for the single-phase version and 10 meters of H07RN-F cable for the three-phase version.

Operating range: from 0 to 32 m3/h with head up to 14 mt

Pumped liquid: sewer water and waste water in general and non aggressive.

Liquid temperature range: from 0°C to +35°C for household use  (EN 60335-2-41), from 0°C to +50°C for other uses.

Maximum ambient temperature for pump running with submersible motor: +40°C

Maximum immersion depth: 10 mt

Installation: fixed or portable, vertical.

Free Passage: 50 mm