Athena R32 | Air Water Heat Pumps

The new generation of Athena heat pumps is based on the air/water model and uses R32 refrigerant in combination with an underfloor heating and cooling system and a domestic hot water tank.

Tekno Point offers several Athena models, including the monobloc, centrifugal and split versions, all of which are easy to install as they do not require refrigeration connections and can be installed in a very short time.

The smallest version of Athena R32 has a power output of 6.80 kW, but this can be increased to a maximum of 17.00 kW in its largest version. The innovative Tekno Point heat pump is available in 5 kW, 7 kW, 9 kW, 13 kW and 17 kW sizes.

If the required power exceeds 17.00 kW, Athena R32 can be connected in series thanks to software and a BUS connection on the RS485 ports of the electronic board, reaching a maximum of 58,000 BTU/h.

Athena R32 is a latest-generation heat pump that can be installed in both new and renovated buildings and is particularly suitable for regions with particularly cold temperatures.

In addition, the new models are eligible for 65% tax deductions, the Conto Termico 2.0 energy efficiency scheme and the 110% superbonus thanks to their high performance coefficient and energy efficiency ratio.

• Internal recirculation pump
• Energy class A++/A+++
• Use of R32 gas
• Silent, 35 dB(A) at a distance of 4.0 m
• High performance from -20°C to +43°C
• Wired control
• Option to request remote control via Wi-Fi with the Smart Life by Tuya app