IDRACLEAN F900, to clean condensing boilers
The two products allow to reduce energy loss due to incrustation inside the boiler. Never use the products with pressurizable sprayers.
Description
Foridra IDRACLEAN F900 A and B allow to break up the deposits inside combustion chambers made of steel or aluminium alloy in condensing boilers.
IDRACLEAN F900 A
Liquid product used to clean steel and aluminium combustion chambers. It can be sprayed directly onto the deposits until they are completely wet. Let the product work for a few minutes (from 5 to 15) before brushing and rinsing.
IDRACLEAN F900 B
Product to be applied after IDRACLEAN F900 A in aluminium boilers, and if necessary also in those made of steel. This product tends to passivate the surfaces and favour the removal of dirt particles from the discharge collectors of the condensers. The product should be left on for a few minutes (from 5 to 10 minutes) to let it to fully penetrate the scale deposits. The area cleaned should be then thoroughly rinsed till the discharge collector of the condenser is completely free of dirt. This product could damage refractory material.
Foridra IDRACLEAN F 900 A and B must be applied when the heat exchanger is cold. The scale deposits should be made thoroughly wet by each product (first F 900 A, then F 900 B). The products should be left on for a few minutes (from 5 to 15 minutes) to allow fully penetration of the scale deposits. The area cleaned should be then thoroughly rinsed (at every application). When one application is not enough to remove all the dirt, we recommend repeating the cleaning operation. If, even then, there are still some deposits in the combustion chamber, make the burner work for a few hours and then recheck the situation. For safety reasons, never use IDRACLEAN F 900 A and B with pressurizable sprayers.
Package: 10 kilos cans.
IDRACLEAN F900 A
Liquid product used to clean steel and aluminium combustion chambers. It can be sprayed directly onto the deposits until they are completely wet. Let the product work for a few minutes (from 5 to 15) before brushing and rinsing.
IDRACLEAN F900 B
Product to be applied after IDRACLEAN F900 A in aluminium boilers, and if necessary also in those made of steel. This product tends to passivate the surfaces and favour the removal of dirt particles from the discharge collectors of the condensers. The product should be left on for a few minutes (from 5 to 10 minutes) to let it to fully penetrate the scale deposits. The area cleaned should be then thoroughly rinsed till the discharge collector of the condenser is completely free of dirt. This product could damage refractory material.
CORRECT USAGE
Foridra IDRACLEAN F 900 A and B must be applied when the heat exchanger is cold. The scale deposits should be made thoroughly wet by each product (first F 900 A, then F 900 B). The products should be left on for a few minutes (from 5 to 15 minutes) to allow fully penetration of the scale deposits. The area cleaned should be then thoroughly rinsed (at every application). When one application is not enough to remove all the dirt, we recommend repeating the cleaning operation. If, even then, there are still some deposits in the combustion chamber, make the burner work for a few hours and then recheck the situation. For safety reasons, never use IDRACLEAN F 900 A and B with pressurizable sprayers.
Package: 10 kilos cans.
Technical features
Applications
Related products
Plant Cleaning Products
Plant Cleaning Products
Plant Cleaning Products
Plant Cleaning Products
Request information for:
IDRACLEAN F900, to clean condensing boilers
