Uponor High Performance Panel

Different homes come up with different conditions and requirements for the installation of underfloor heating. Be sure you will find a solution that perfectly fits your preferences or specific requirements, whether you want to equip a new house or renovate an existing one

Thanks to its low height of about 10 mm, the Uponor high performance panel is the ideal choice for renovation or wherever the fastest reaction time is required. The panel can easily be laid on existing floor constructions like screed, tiles, or timber. The total height can be limited to 15 mm, also thanks to the special Uponor PE-Xa pipe of 9.9 x 1.1 mm.

Insulation regulations acc. To DIN 18/560 and EN 1264. The existing load distribution layer and the newly applied filing compound must allow linear expansion (edging strips). If the subsoil does not meet the requirements of DIN 18202, it must be levelled using an appropriate filling compound. The subsoil must be solid, load-bearing, clean, skid-proof, free from parting substances and dry. The load distribution layers should be removed mechanically, floor boards must be mounted properly and old floor coverings such linoleum, carpet or laminate should be completely removed without leaving residue.
Use only special screed, please contact Uponor.

Benefits

•    An ideal approach for renovation or modernisation
•    Option of installation on existing floor coverings
•    Total height can be limited to only 15 mm
•    Short heating times and fast response
•    Easy connection to existing heating systems