SolarPipe

General data
A. Service pipe
Material: hard copper, Cu-DHP CW024A acc. to EN 12499
B. Insulation
Material: closed-cell polyurethane
Lambda value at +50°C: 0.0285 W/mK
Operating temperature: 140°C/30 years continuously
C. Casing pipe
Material: UV-resistant PE-HD polyethylene
Pipes - length 5 m
Ø22/90 mm, Ø28/90, Ø35/90 mm, Ø42/110 mm and Ø54/110 mm
Elbows angle 90° and 45°
diameters for both types Ø22/90 mm, Ø28/90, Ø35/90 mm, Ø42/110 mm, Ø54/110 mm
T-fitting
Diameters 22/90 x 22/90 x 22/90 28/90 x 28/90 X28/90 35/90 x 35/90 x 35/90 42/110 x 42/110 x 42/110 54/110 x 54/110 x 54/110
Joint shrinkable collar
Ø90 mm and Ø110 mm - width 225 mm
Insulation half-shells

Ø90mm and Ø110 mm These are used along with the shrinkable collars
Wrap set open shrinkable collar
Ø90mm and Ø110 mm - width 225 mm
End-cap DHEC    for Ø90 mm and Ø110 mm
Pre-insulated pipe system for solar power installations
Pipes
Elbow 45°
Elbow 90°
T-fitting
Collar
Insulation shells
Wrap set

Quality-managed production and installation

LOGSTOR proactively addresses quality and environmental concerns right from component manufacture to finished installation. As part of these efforts, all LOGSTOR production companies are certified in accordance with ISO 9001 and ISO 14001.