MIRAI SPLIT - Split heat pump for Heating and Cooling Residential environments EMMETI 2018

Heat Pump composed of two sections with internal hydraulic module and external unit with refrigerant circuit at R410A.

Description


MIRAI-SPLIT offers both a compact size as well as a complete range of functions, since the components of the heating and cooling system, such as the circulation pump, expansion vessel and temperature control instruments, are already incorporated inside the machine.

The unit is composed of two sections with internal hydraulic module and external unit with refrigerant circuit at R410A. Two units are connected by refrigerant lines for the refrigerant circulation.

The simplicity of its installation also meets the versatility of the machine, which can operate with an outdoor temperature until -20 °C, suitable for a variety of system types such as radiant systems (heating/cooling), terminal air units (cassette or fan-coil convectors) and low-temperature radiators thanks to the wide range of water flow temperature settings which can
be as high as 55 °C.

Furthermore, since it’s designed for residential use, the type of electric power supply required and the truly reduced consumptions make it compatible with the standard electricity supply conditions set by the provider.

“DC Inverter” technology allows continuous variation of the power according to the demands of the system, an optimised management of the electricity consumptions as well, thus increasing the product’s performances so as to guarantee the compliance of the strict foreseen energy efficiency criteria.

Technical features


Outdoor unit constructional characteristics
  • Compressor: brushless DC rotary hermetic compressor, twin-rotary type, complete with thermal protection and crankcase heating element;
  • Electronic expansion valve;
  • Air-side heat exchanger with copper pipes and aluminium fins;
  • Axial fans with brushless DC motors equipped with electronic proportional device for continuous speed regulation, internal thermic protection and safety grilles;
  • Electronic control panel and for management purposes, equipped with electrical connections to the internal unit;
  • Structure in painted galvanised steel sheet.
 
Indoor unit constructional characteristics
  • Water-side heat exchanger with stainless steel plates equipped with circulator, water flow switch, thermic insulation in polyurethane foam rubber;
  • Electronic control panel and for management purposes, equipped with electrical connections to the external consents;
  • Outdoor temperature probe to control and climatic compensation of the set-point (supplied standard);
  • DHW probe and control ball-valve three ways;
  • Water filter (supplied standard).
 
Accessories (supplied separately)
 
  • 3-Way valve for the production of domestic hot water, to be connected to the unit’s electronic control panel of management;
  • Set of anti-vibration mounts adjustable;
  • Antivibrating flexibles.
     

Request information for:

MIRAI SPLIT - Split heat pump for Heating and Cooling Residential environments EMMETI 2018
Accept terms and conditions of Expoclima and data protection and privacy policy of ExpoClima.