



Heat Pump ON/OFF EH RESIDENZIALI EMMETI 2018
Monobloc unit with air condensation and horizontal-flow axial fans for outdoor installation provided with: inertial storage, circulation pump, hermetic scroll compressors and the refrigerant R410A.
Description
Residential Air cooled heat pumps with AXIAL fans and water-circulation units.
Monobloc unit with air condensation and horizontal-flow axial fans for outdoor installation provided with: inertial storage, circulation pump, hermetic scroll compressors.
EH 0510 ÷ 1110 MS / EH 0910 ÷ 3010 T Models
Constructional characteristics
Standard set-up
Accessories supplied separately
Monobloc unit with air condensation and horizontal-flow axial fans for outdoor installation provided with: inertial storage, circulation pump, hermetic scroll compressors.
EH 0510 ÷ 1110 MS / EH 0910 ÷ 3010 T Models
Constructional characteristics
- Scroll-type rotary hermetic compressor complete with thermal protection and crankcase heating element;
- Water-side plate exchanger in stainless steel complete with antifreeze heating element, water-flow differential pressure switch and external insulation;
- Air-side finned pack exchanger with copper pipes and aluminium fins, complete with grid protection;
- Axial-type electric fans with external rotor equipped with internal thermal protection and safety grilles;
- Electronic device for continuous adjustment of the speed of rotation of the fans
- Electronic control with “Carel” microprocessor with a panel for displaying and setting the operating parameters;
- Structure in painted galvanized steel plate. Completed by condensation tray and antifreeze heating element in the base of the unit.
Standard set-up
- Hydronic unit, complete with: inertial storage, electric/circulation pump, diaphragm expansion vessel, air-relief valves, safety valve;
- Soft-start, starting current reduction device (for models with 230 V power supply);
- Low and high pressure switch;
- Double set-point using digital enable;
- Mains water filter;
- Condensation/evaporation control
Accessories supplied separately
- EKSA Rubber antivibration mounts;
- EKTR Remote keypad with display;
- EKRS485 Serial interface for connection to BMS (Modbus RTU);
- EKSC Clock card, to be combined with the remote keypad.
Related products
