Scheda prodotto

Hydrobox Plus EMMETI 2016

Built-in box for water with ball valves, retractable knobs and circulator

Macro categoria: Components
Categoria: Collectors inserts

Descrizione generale

Box for sanitary distribution manifolds, pre-assembled with with ball
shut-off valves and circulator for the circulation of hot water, suitable for
built-in wall-mounting.

Caratteristiche tecniche

Features:
- Box designed for Modular manifolds 3/4” up to 4 ways in the model
310x310 mm, up to 8 ways in the model 460x310 mm;
- Shut-off handles located behind elegant chrome plated or white doors
(included) o anthracite (optional);
- Shut-off valves replaceable without demolition;
- circulator for the return of hot water to the heat generating unit replaceable
without demolition;
- Unit to control the circulator with a hot water temperature probe;
- Reversibility of the input lines (Right or Left);
- Compact size (110 mm) for drilling thickness 80 mm and plaster with a
minimum thickness of 15 + 15 mm
Technical data
DN15 valves with threaded connections 3/4” M-M
Opening and closing by turning the knob by 90°
Temperature range from -20 °C to +120 °C
Nominal pressure 50 bar
O-Ring rod seal in NBR 70 Sh-A (AS TN D 2240)
Circulator
Motor: Electronic speed switching selectable on 5 levels
Power supply: from 8 to 24 Vdc
Electrical power consumption: from 1 to 22 W (at 12 Vdc); from 1 to 36
W (at 24 Vdc)
Current consumption: from 0.25 to 1.9 A (at 12 Vdc); from 0.25 to 1.5 A
(at 24 Vdc)
Maximum operating temperature: from -10 °C to + 95 °C
Insulation class: IP 42 / Class F
Control unit
Power supply: from 12 to 27 Vdc
Circulator contact capacity max 60 W / 24 Vdc
Equipped with:
- thermostat with set-point adjustment and activation temperature differential;
- NTC temperature probe for hot water piping;
- input for activation timer;
- input for out of schedule activation (for example presence sensor);
- input for continuous activation, independent from the thermostat (example
disinfection for legionella managed by the heat generating unit).
Box materials
Box, cover and doors in ABS;
Supports for valves and manifolds in PA 6